General Industrial Tapes
Packaging Tapes
Safety Tapes
Electrical Tapes
Graphic Arts Tapes
Point of Purchase Tapes
Die Cuts & Custom Converting
Dispensers
Printed Tapes, Custom Labels
3M™ Industrial Tapes
Services & Capabilities
Request a Quote
Terms and Conditions of Sale
About Us
Electrical Tapes
UHMW/Teflon/Glass Cloth Tapes:
UHMW Polyethylene Tapes
Teflon (Skived PTFE Film) Tapes
Teflon Coated Glass Fabric Tapes
Anti-Slip Tape (Printer’s Friend) Smooth Version
Roller Covering Tape (Dimple Version)
High Temperature Tapes:
Kapton Polymide Tapes
Double Coated Kapton Polymide Tape
Glass Cloth Thermal Spray Masking Tapes
Glass Cloth Insulation Tape /
Rubber Thermosetting Adhesive Tape
Polyester Splicing & Printed Circuit Board Tapes
Fabric/Vinyl/Plastic Tapes:
Friction Tape
Pipe Thread Sealing Tapes
Vinyl Electrical Insulation Tapes
Heavy Duty SPVC Vinyl Tapes
Vinyl Electroplating Tape
Foil Tapes:
Aluminum Foil Tapes (with liner)
Aluminum Foil Tapes (without liner)
Aluminum Foil/Scrim/Kraft Tapes
Aluminum Foil/Glass Cloth Tape
Copper Foil Tapes
Lead Foil Tapes

Skived TeflonTM (PTFE Film) Tapes


Skived TeflonTM (PTFE Film) Tapes

Self-Wound (without liner)
Pure skived TeflonTM (PTFE) with a high temp. silicone adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip and lubricity are required. *TSI# 721 is a high density, TENSILIZED skived PTFE film which provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film (primarily used for electrical applications listed above & for roll protection in flat die extrusion). High elongation of TSI# 722 permits tight wrapping; conforms to sharp bends/irregular surfaces. Meets MIL-I-23594C, type 1, Revised Spec. AA 59474. 3" plastic core.

Physical Properties
 
721
722
723
Backing
2 mil/0.002”
5mil/0.005”
10mil/0.010”
Total thickness
0.004"
0.0080"
0.0130”
Break strength (lb/in)
30
15
60
Adhesion (oz/in)
25
30
55
Elongation
100
200
300
Temperature rating (°F cont. use)
-100 to +500
-100 to +500
-100 to +500
Dielectric strength (total volts)
8,200
12,000
14,500

721 - Skived TeflonTM (PTFE Film) Tapes

721 - Skived TeflonTM (PTFE Film) Tapes
LENGTH: 36 YD (108’) 33M
WIDTH
RLS/CS
1/4"       (6.3mm)
144
3/8"       (9.5mm)
96
1/2"       (12.7mm)
72
3/4"       (19.0mm)
48
1"       (25.4mm)
36
1.5"       (38.1mm)
24
2"       (50.8mm)
18
3"       (76.2mm)
12


722 - Skived TeflonTM (PTFE Film) Tapes

722 - Skived TeflonTM (PTFE Film) Tapes
LENGTH: 36 YD (108’) 33M
WIDTH
RLS/CS
1/4"       (6.3mm)
144
3/8"       (9.5mm)
96
1/2"       (12.7mm)
72
3/4"       (19.0mm)
48
1"       (25.4mm)
36
1.5"       (38.1mm)
24
2"       (50.8mm)
18
3"       (76.2mm)
12

3M Comparable:3M™ 5480 & 5481 (PDF* 10kb)



723 - Skived TeflonTM (PTFE Film) Tapes

723 - Skived TeflonTM (PTFE Film) Tapes
18 YD (54’) 16.5M
WIDTH
RLS/CS
1/4"       (6.3mm)
144
3/8"       (9.5mm)
96
1/2"       (12.7mm)
72
3/4"       (19.0mm)
48
1"       (25.4mm)
36
1.5"       (38.1mm)
24
2"       (50.8mm)
18
3"       (76.2mm)
12


     Request a Quote
:
:


TSI Tape Systems, Inc.

Toll Free 1-(800) 331-6758

© Copyright 2024 TSI Tape Systems, Inc. Website created and suported by TR REDESIGNS