Foil Tapes:
909A-FSK Aluminum Foil/Scrim/Kraft Tapes
with acrylic adhesive
Dead soft aluminum foil / 3-way fiberglass scrim / paper carrier
coated with aggressive adhesive carried on a 3.2 mil removable
paper release liner. Malleable foil conforms well to irregular and
curved surfaces to maximize adhesive contact and provide
quick, positive grab to the insulation surface. Used as a closure
system for fiberglass and mineral wool insulation systems that
are faced with foil, to seal seams and joints on aluminum faced
fiberglass duct board, and to provide a vapor barrier that assures
the integrity of the system. 3” neutral core.
909A-FSK Aluminum Foil/Scrim/Kraft Tapes
Physical Properties |
| |
909A-FSK |
909R-FSK |
| Adhesive |
solvent based acrylic |
synthetic rubber resin |
| FSK Backing |
4.8 mil
|
4.8 mil |
| Tape Thickness (w/o liner) |
6.8 mil
|
6.8 mil |
| Adhesion |
72 oz/in. |
90 oz/in |
| Rolling Ball Tack |
7.9 in |
8 in |
| Temperature Resistance |
-4°F to 248°F |
-4°F to 176°F |
909A-FSK Aluminum Foil/Scrim/Kraft Tapes
50 YD (150FT) |
WIDTH |
RLS/CS |
2" (48mm) |
24 |
3" (72mm) |
16 |
4" (96mm) |
12 |
909R-FSK Aluminum Foil/Scrim/Kraft Tapes
with rubber adhesive
Dead soft aluminum foil / 3-way fiberglass scrim / paper carrier
coated with aggressive adhesive carried on a 3.2 mil removable
paper release liner. Malleable foil conforms well to irregular and
curved surfaces to maximize adhesive contact and provide
quick, positive grab to the insulation surface. Used as a closure
system for fiberglass and mineral wool insulation systems that
are faced with foil, to seal seams and joints on aluminum faced
fiberglass duct board, and to provide a vapor barrier that assures
the integrity of the system. 3” neutral core.
909A-FSK Aluminum Foil/Scrim/Kraft Tapes
50 YD (150FT) |
WIDTH |
RLS/CS |
2" (48mm) |
24 |
3" (72mm) |
16 |
4" (96mm) |
12 |
|
