Industrial Film and Cloth Tapes:
5000 Industrial Film Tapes
Low density polyethylene film tape. Acrylic adhesive. Highly conformable.
Good abrasion and chemical resistance. Outstanding moisture barrier
properties. Acrylic based pressure sensitive adhesive system provides
high adhesion and cohesion which yields a permanent bond with
virtually no edge bleed out. UV resistant. Excellent long term aging
stability without yellowing. Will not crack or crease at low temperatures.
3” plastic core.
Applications
Water filter purification pipe wrap, protective sealing, splicing, seaming and
patching where a highly conformable and optically clear material is required.
Physical Properties |
| Total thickness |
5.5 mil (0.14mm) |
| Tensile strength |
11 lbs/in. width |
| Elongation (at break) |
400% |
| Adhesion to steel |
56 oz/in. |
| Operating temperature range |
50°F to +120°F |
5000 Industrial Film Tapes
36 YD (33M) 108 FT |
WIDTH |
RLS/CS |
1/4" (6mm) |
192 |
3/8" (9mm) |
128 |
1/2" (12mm) |
96 |
3/4" (18mm) |
64 |
1" (24mm) |
48 |
1.5" (36mm) |
32 |
2" (48mm) |
24 |
3" (72mm) |
16 |
4" (96mm) |
12 |
6" (144mm) |
8 |
8 COLORS AVAILABLE: Optically clear, black, green,
orange, red, blue, white & yellow.
5010 Industrial Film Tapes
5.5 mil Low density polyethylene film tape coated on one side with
a synthetic solvent rubber based adhesive remains permanently
tacky and bonds well to most surfaces over a wide range of temperatures;
excellent low temperature bond. Tough polyethylene
backing offers good abrasion and tear resistance. Highly conformable,
waterproof and resistant to chemical deterioration. 3” core.
Applications
Ideal for polyethylene spicing; patching/repairing poly sheeting
used in boating and RV industry; surface protection & electroplate
masking; wire identification; packaging; etc. Works well in most
applications where a low thread count polyethylene coated cloth
tape is being used.
Physical Properties |
| Total thickness |
9.0 mil (0.229mm) |
| Film thickness |
5.5 mil |
| Adhesive |
S.B. Synthetic Rubber |
| Tensile strength |
22 lbs/in.. |
| Elongation |
100% |
| Adhesion to Steel |
70 oz/in. |
| Adhesion to Backing |
35 oz/in. |
5010 Industrial Film Tapes
36 YD (33M) 108 FT |
WIDTH |
RLS/CS |
1/2" (12mm) |
96 |
3/4" (18mm) |
64 |
1" (24mm) |
48 |
1.5" (36mm) |
32 |
2" (48mm) |
24 |
3" (72mm) |
16 |
4" (96mm) |
12 |
6" (144mm) |
8 |
5010 Industrial Film Tapes
60 YD (55M) 180 FT |
WIDTH |
RLS/CS |
1/2" (12mm) |
96 |
3/4" (18mm) |
64 |
1" (24mm) |
48 |
1.5" (36mm) |
32 |
2" (48mm) |
24 |
3" (72mm) |
16 |
4" (96mm) |
12 |
6" (144mm) |
8 |
5 COLORS AVAILABLE: Clear, white, red, black & blue.
|
(PDF* 11kb)
