Safety Tapes
S184DOT Reflexite Retroreflective Tape
Reflexite® Conspicuity material is composed of cube corner (microprism)
retroreflective elements integrally bonded to a flexible,
smooth-surfaced, tough and weather-resistant UV-stabilized polymeric
film. The prism surfaces are coated with a vacuum deposition
of aluminum to provide a mirror surface to the prism facets.
The resulting tape is not more than 0.008” thick and comes with an
aggressive high-tack pressure-sensitive adhesive.
Application
Reflexite® Visibly BetterTM Retroreflective conspicuity material is a
tough weather and solvent resistant product designed for rugged
outdoor use on the sides and rear of trucks, trailers, automobiles,
and emergency vehicles to enhance safety on the roadway by
improving their visibility. NOTE: NHTSA conspicuity regulations
(effective 12/1/93) mandate that all new trailers - 10,000 lbs GVW
and 80” wide or larger, must be reflectorized with alternating red &
white retroreflective sheeting on the sides, bottom of rear door, and
ICC bar; and two pieces of white sheeting on the upper corners of
the rear. Application temperature: minimum 50°F.
Features/benefits
- Durability >>> 5-year or 10-year warranty <<< Withstands brushing
off of dirt and grime, and high pressure washing. Polyester
based film resists cracking & lifting. Will retain reflectivity even
after impact against loading dock or abrasion by chains.
- Unique, single-ply construction ensures impact & abrasion resistance
and easy application.
- 0.008” thickness resists dirt accumulation typical of competitor’s
thicker (0.025”), open-cell construction. Material is extremely thin
so there are no raised edges that can catch and tear.
- Unlike competing conspicuity materials, Reflexite® conspicuity
material features 100% adhesion, with no grid lines that can fill
with water and cause premature adhesive failure.
- Super-high brightness & wide angularity: Typically 1000 candlepower
with tremendous long sight distance performance; reflects
at all applicable angles on the roadway.
Specification compliance... |
ASTM D4956 |
NHTSA 49 CFR, Part 571 |
LS300C |
DOT-C2 |
FP92 |
FMVSS 108 |
ASTM D523 |
|
ASTM E810 |
|
S184DOT Reflexite Retroreflective Tape
50 YD (150 FT) |
WIDTH |
RLS/CS |
1" * (25mm) |
20 |
1.5" (38mm) |
24 |
2" * (50mm) |
10 |
3" (75mm) |
12 |
4" (100mm) |
9 |
6" (150mm) |
6 |
*Pre-slit.
|