Release Agents
1680 Mold Release Agent
TSI 1680 is an economical 3% silicone mold release agent. It is recommended
for injection, RIM, rotational molders, as well as extruders and vacuum formers.
This product can be used with all common resins. Not recommended where painting,
metalizing, or bonding of components may be required.
1680 Mold Release Agent
1680 Mold Release Agent |
| Applications |
TSI 1680 is an economy grade
universal silicone release agent. For
use on all plastic and rubber molding |
| Container Size |
16 Fluid Ounce Can |
| Product Description |
Economy Silicone Mold Release |
| Net Weight |
9 Ounces |
| Cans Per Case |
12 |
| Case Dimensions-Inches |
11.75 L X 8.75” W X 9.125” H |
| Case Weight |
10.6 Pounds |
| Cases Per Pallet |
90 |
| Appearance |
Colorless Non-Staining Liquid |
| Odor |
Mild solvent when wet /
Odorless when dry |
| Solvent System |
Hexane |
| Propellant |
Hydrocarbon |
| Bond Time |
-40°F - 500°F |
| Heat Resistance |
Max. Service Temperature 120° F |
| Solids |
3% |
| Spray Pattern |
Dry Conical Mist |
| VOC % |
97 |
| VOC Compliant for CA & OTC |
Not Regulated |
| NSF Registered |
No |
| Aerosol Flammability Level |
Level 3 Aerosols |
| Warranty Period |
One Year From Date of Shipment |
| DOT Proper Shipping Name |
Consumer Commodity ORM-D for domestic
ground shipment. (See MSDS for
additional shipping information) |
|
